A Selective Cholesterol Biosensor Based on Composite Film Modified Electrode for Amperometric Detection

An amperometric cholesterol biosensor based on immobilization of cholesterol oxidase in a Prussian blue (PB)/polypyrrole (PPy) composite film on the surface of a glassy carbon electrode was fabricated. Hydrogen peroxide produced by the enzymatic reaction was catalytically reduced on the PB film electrode at 0 V with a sensitivity of 39 μA (mol/L)^?1. Cholesterol in the concentration range of 10^?5 ? 10^?4 mol/L was determined with a detection limit of 6 × 10^?7 mol/L by amperometric method. Normal coexisting compounds in the bio‐samples such as ascorbic acid and uric acid do not interfere with the determination. The excellent properties of the sensor in sensitivity and selectivity are attributed to the PB/PPy layer modified on the sensor.     

Protective properties of redox polymer film deposited on stainless steel

We propose a novel composite organic-inorganic coating in the form of a redox polymer film for protection of stainless steel against general corrosion in strong acid medium (2 M H₂SO₄). We utilize an anion exchange polymer, protonated poly(4-vinylpyridine), into which hexacyanoferrate anions have been introduced. Owing to the presence of Fe(CN)₆^3–/4– at the interface formed by the film and the steel, a sparingly soluble metal hexacyanoferrate (mostly Prussian blue, PB) is formed as an overcoating on the steels surface, presumably on the passive (metal oxide) layer. The redox polymer film on the steel seems to act as a composite three-dimensional bilayer-type coating in which hexacyanoferrate(III,II) anions (that are capable of effective charge storage) exist in the outer portions of the film, whereas the inner PB layer improves the systems overall adherence and stability. By analogy to a conducting polymer (e.g. polyaniline, polypyrrole), introduction of the redox polymer composite film leads to stabilization of the steel substrates potential within the passive range.Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

纳米尺寸聚苯乙烯-丙烯酸彩色高分子微球的合成与表征

以苯乙烯、丙烯酸、分散蓝染料为原料,采用分步聚合的方法合成了彩色具有核–壳结构的分散蓝/聚苯乙烯–丙烯酸高分子微球。通过TEM测得其颗粒尺寸约为200nm,分散均匀;通过FTIR对颗粒的组成结构进行表征,并对其合成过程进行探讨。     

巯基乙酸自组装膜DNA电化学传感器对转基因NOS的定量检测

以转基因植物中常用的根癌农杆菌终止子(NOS)为检测对象, 将巯基乙酸自组装于金电极表面形成巯基乙酸自组装单分子膜, 再利用乙基-(3-二甲基氨丙基)碳二亚胺盐酸盐(EDC)和N-羟基琥珀酰亚胺(NHS)的活化作用将NOS探针ssDNA序列固定于金电极表面形成NOS电化学生物传感器, 以亚甲基蓝(MB)为杂交指示剂, 对NOS靶基因相关序列进行了定量检测.     

溶剂热法制备Ag/TiO2纳米材料及其光催化性能

以乙醇为溶剂, 钛酸四丁酯为前驱体, 用溶剂热法制备了Ag表面修饰的负载型纳米二氧化钛光催化剂. 利用X射线衍射(XRD)、N₂吸附-脱附(BET)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、紫外-可见(UV-Vis)光谱等技术对其进行了系统的表征, 以亚甲基蓝(MB)溶液的脱色降解为模型反应, 考察了不同Ag含量样品的光催化性能. 结果表明: 用溶剂热法制备的样品中TiO₂皆为锐钛矿相, 金属Ag颗粒沉积在TiO₂表面, 粒径为2 nm左右, 比表面积较溶胶凝胶法制备的样品大大增加, 最高可达151.44 m²·g^-1; UV-Vis光谱和光催化实验表明: Ag修饰使TiO₂对光的吸收能力大大增强, 吸收带边红移至可见光区, 亚甲基蓝在该复合材料上的光催化降解反应遵循一级反应动力学模型; 溶剂热法制备样品的光催化性能明显好于溶胶凝胶法制备的样品, 在紫外光和可见光下, Ag摩尔分数为5%的样品表现出最佳的光催化活性.     

考马斯亮蓝-SLS体系共振瑞利散射法测定蛋白质

研究了考马斯亮蓝与蛋白质的结合反应。在十二烷基磺酸钠的存在下,于pH1.6的酸性介质中,蛋白质与考马斯亮蓝可形成复合物,使最大波长351 nm的共振光散射光谱得到加强,据此,用于蛋白质的定量测定。十二烷基磺酸钠的加入,可使灵敏度提高3.2倍。本法测定牛血清白蛋白、人血清白蛋白、卵蛋白、γ-球蛋白的线性范围分别为:0.04~0.8、0.03~0.5、0.04~1.00、.06~1.2 mg/L,检出限分别为:6.3、4.7、7.9、9.2μg/L。已用于人血清、牛奶、豆浆、尿液中蛋白质的测定,所得结果与经典的考马斯亮蓝法一致。     

New (1R,4R)-2-arylidene-p-menthan-3-ones with a bridging ester group in the arylidene fragment. Synthesis and behavior in liquid-crystalline systems

(1R,4R)-2-(4-Hydroxybenzylidene)- and (1R,4R)-2-(4"-hydroxybiphenyl-4-yl)methylene-p-menthan-3-ones were synthesized by condensation of (–)-menthone with O-tetrahydropyran-2-yl derivatives of 4-hydroxybenzaldehyde and 4"-hydroxy-4-formylbiphenyl, respectively, in a DMSO—base medium followed by the removal of the protective group. The reactions of these hydroxy derivatives with 4-alkylbenzoic, 4-alkyloxybenzoic, trans-4-alkylcyclohexane-4-carboxylic, and 4"-alkylbiphenyl-4-carboxylic acids afforded three series of new chiral esters. Compounds containing the arylidene moiety with three benzene rings were found to exhibit liquid-crystalline properties. The characteristic features of these compounds are discussed based on the results of studies by polarizing microscopy, differential scanning calorimetry, and small-angle X-ray scattering. It was found that the mesomorphic compounds under study can form a smectic A mesophase, twist grain boundary mesophases (TGBA), and blue phases in a wide temperature range. Upon dissolution of certain of chiral compounds in 4"-cyano-4-pentylbiphenyl, a rather high twisting power and the thermal stabilizing effect on mesophases were observed.     

光谱电化学法研究亚甲基蓝的电还原反应

用极谱法研究亚甲基蓝(MB)的电极吸附过程早有报道.近几年,用光谱电化学法研究其电化学行为又引起了许多人的兴趣.但在光透薄层电极上,由于光程太短,测试溶液浓度较高,导致亚甲基蓝发生聚合,影响实验结果的准确测定.为此本文利用特制的比色皿型长光程薄层光谱电化学池,在低浓度条件下研究其在SnO_2镀膜玻璃电极上的电还原反应.     

多色蓝在核酸分子上的Langmuir聚集吸附

用微相吸附-光谱修正（MPASC）新技术研究核酸与多色蓝(PCB)探针分子间的相互作用，分析核酸分子内双静电膜的形成与Langmuir吸附的关联性.通过pH 7.24的介质核酸-PCB反应的光谱研究，测定了结合产物的物理化学参数：结合比1PCB:2DNA-PCB、1PCB:3RNA-PCB, 平衡常数KDNA-PCB=5.42×104， KRNA-PCB=2.82×104,摩尔吸收系数ε(DNA-PCB, 625 nm)=5.65×103（mo1－1•L ）•cm－1， ε(RNA-PCB, 625 nm)=3.85×103 （mol－1•L）•cm－1.结果表明， RNA分子仅形成约60％双螺旋结构链，核酸双螺旋每一周期的负静电沟最大聚集10个PCB分子.该吸附反应用于核酸样品测定，结果良好.